Specifications
Downloads
Compatible products
| Lighting specifications | ||
| Illumination area width | (mm) | 295 |
| Illumination area height | (mm) | 25 |
| Emission angle | (deg) | backlight |
| Number of LEDs | 12 | |
| Light color, peak wavelength | red, 630 nm | |
| Spectral FWHM | (nm) | 20 |
| Illuminance (1) | (klux) | n.a. |
| Irradiance (1) | (W/m2) | - |
| Diffuser | yes | |
| Polarization film | no | |
| Electrical specifications | ||
| Supply voltage (2) | (V) | 24 |
| Peak power consumption | (W) | 18 |
| Operating mode | Continuous | |
| Daisy-chain | no | |
| Max continuous current | (A) | 0.750 |
| Max pulse current | (A) | - |
| Minimum Ton | (μs) | 1000 |
| Maximum Ton | (ms) | - |
| Max duty-cycle | (%) | 100 |
| Max frequency | (Hz) | - |
| Input connector | M12, 5 pins, male | |
| Output connector | - | |
| Cables (3) | CBLT014, CBLT015 | |
| Mechanical specifications | ||
| Width | (mm) | 307 |
| Height | (mm) | 66 |
| Thickness | (mm) | 33 |
| Mass | (g) | 400 |
| Clamping system | 4x ø5 holes | |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| IP rating | IP40 | |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Exempt | |
Last update 18 Apr 2024
Notes
- Measured at 200 mm for models with lenses. Measured at emitting surface for backlight models.
- Tolerance ± 5%.
- Not included. Must be ordered separately.
Ordering information
Our part numbers are coded as LTBRZ3-x-y-w-p-e, where:
x Defines the operation mode of the barlight
C means continuous mode only
P means pulsed mode only
y Defines the colour
R is Red, 630 nm
G is Green, 530 nm
B is Blue, 470 nm
W is white, 6500K colour temperature
IR is Infrared, 850nm
w defines the beam angle:
10 means that each LED emits a circular beam with an aperture of ~10°
20 means that each LED emits a circular beam with an aperture of ~20°
30 means that each LED emits a circular beam with an aperture of ~30°
50 means that each LED emits a circular beam with an aperture of ~50°
EL means that each LED emits an elliptical beam with an horizontal aperture of ~35° and a vertical aperture of ~15°
BL means that LEDs emit a uniform pattern suitable for backlight applications
p defines the presence of a polarizing film
PH means that the polarizing axis of the film is parallel to the width of the illuminator
PV means that the polarizing axis of the film is parallel to the height of the illuminator
Leave this field empty if the polarizer is not required
e defines the presence of a daisy chain connector
Leave this field empty if the daisy-chain is not required
For additional options, such as wavelenghts, optical, electronical or mechanical customization, contact us.
x Defines the operation mode of the barlight
C means continuous mode only
P means pulsed mode only
y Defines the colour
R is Red, 630 nm
G is Green, 530 nm
B is Blue, 470 nm
W is white, 6500K colour temperature
IR is Infrared, 850nm
w defines the beam angle:
10 means that each LED emits a circular beam with an aperture of ~10°
20 means that each LED emits a circular beam with an aperture of ~20°
30 means that each LED emits a circular beam with an aperture of ~30°
50 means that each LED emits a circular beam with an aperture of ~50°
EL means that each LED emits an elliptical beam with an horizontal aperture of ~35° and a vertical aperture of ~15°
BL means that LEDs emit a uniform pattern suitable for backlight applications
p defines the presence of a polarizing film
PH means that the polarizing axis of the film is parallel to the width of the illuminator
PV means that the polarizing axis of the film is parallel to the height of the illuminator
Leave this field empty if the polarizer is not required
e defines the presence of a daisy chain connector
Leave this field empty if the daisy-chain is not required
For additional options, such as wavelenghts, optical, electronical or mechanical customization, contact us.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
Request a quote
Add this product to the quote request list.
Product images
